To create a Jack-O’-Lantern, put one pumpkin carved into the crafting GUI and place it at the centre of the grid of 3×3 along with a torch stick under it.
After you have completed making your Jack-O-Lantern you can move it into your inventory.
Jack-o’lantern is a strong carving pumpkin block that has been updated to reflect the Halloween theme in Minecraft.
In real life, the jack-o’-lantern is a festive pumpkin lantern that is associated with Halloween.
In contrast, its usage in Minecraft differs a bit from what is happening.
They serve as light sources in a torch-like manner.
The primary difference is that it has a larger light radius and its light source is a bit larger and also capable of working underwater.
A further benefit is that Jack-o-Lanterns can protect Hostile Mobs from being able to keep them away.
Essential Materials for making a Jack O lantern
- One block Carved Pumpkin
- Torch
The pumpkin in Minecraft is an item that can’t be made using an oven or a table.
Instead, you must discover and gather this item from the game.
The first step is to discover a plant that grows in the pumpkin within your Minecraft world.
It is typically found inside the Extreme Hills or Plains biomes.
If you find an invasive pumpkin plant, then you have to remove the pumpkin.
Be sure to pick up the pumpkin before it vanishes.
Now you’ve got an ox.
Cut your pumpkin using the following recipe, which needs just two iron ingots
The shears are in your possession as the pumpkin.
Also Read: 18 Best Medieval Mods For Minecraft
You are now able to finish making one of the basic building blocks of the Jack-o’lantern.
Put the pumpkin close to your feet in the dirt.
Install the shears with the Hotbar.
Make use of the shears on the pumpkin by left-clicking while you have the shears on.
There will be marks, similar to the one in the image below that will show that the pumpkin has been cut successfully.
The last thing to do is clean out the pumpkin you carved and put it within your storage.
Torch:
To create a torch put 1 coal or charcoal and 1 stick into the 3×3 grid for crafting.
How to Make a Jack O Lantern in Minecraft?
Step-by-Step Guide:
This is a step-by-step picture instruction you must follow to make a Halloween Jack-O-Lantern in Minecraft:
Create a table at the crafting table:
Start your crafting table by beginning with making your Jack o’lantern with the obtained ingredients in your inventory.
After you have opened your crafting table, you’ll have a 3×3 grid for crafting as shown in the image below:
Add Carved pumpkin:
Add the carved pumpkin block from your inventory into the second cell on the row that starts.
Place torches:
The torch should be placed just below the pumpkin you’ve carved that is in the second cell of the second row.
How do you use the Jack O lantern?
Jack o’lanterns can be lit when submerged and can have a brightness of 15.
They are also able to create snow golems or iron golems.
The snow golems have bodies made of snow, while iron golems are constructed out of iron blocks.
Also Read: How to Make an Observer in Minecraft?
They can be placed with or without the need for a block beneath them.
Once they are placed, the Jack-o’lantern automatically turns to face the player.
Video Guide
FAQs
Q1. Where can the Jack O’Lanterns appear in Minecraft?
Ans. You may see a ready-made Jack o’lantern in the pumpkin piles which grow in taiga or the snowy taiga villages.
They are most readily located at night, as Jack lanterns can be seen glowing brilliantly.
Q2. What is the level of light of the Jack O lantern?
Ans. Jack o’lanterns have a luminance of 15 and an ability to illuminate when submerged.
Final Words
Congratulations you’ve successfully constructed a lantern, Jack.
They are used for decoration, however, they can also be made into golems out of iron and snow.
The Jack-o-lanterns are impressive navigational beacons due to their peculiar appearance and bright levels.
They can be found in thematic projects for building the ghost house creating a sense of spookiness, particularly when combined with cobwebs or Redstone torches.
Jack-o’-lantern is an interesting-looking carved pumpkin that was added as part of the Minecraft Halloween special update. While its usage in the game varies a bit from that in the real world, how useful and decorative it is, remains an undeniable fact.
So what can players use Jack O Lantern in Minecraft for and how can they make one for themselves? Here's a complete guide for all that matters.
Table of Contents
A Jack O lantern can serve as a light source as well as keep hostile mobs far away. Jack O lantern in Minecraft recipe requires just a few components, bearing in mind that it is such a multifunctional item. The require materials include:
- Torch
- 1 block of Carved Pumpkin
You only need to place 1 charcoal/coal and a stick in the 3x3 crafting grid to craft a torch. Carving a pumpkin, meanwhile, would take more time.
A Minecraft pumpkin is not an item players can make with a furnace or a crafting table. Instead, they must find and collect it.
First, look for a pumpkin plant that grows in the Minecraft world. You can usually find one in the Plains or Extreme Hills biomes. Once a pumpkin has been found, players must dig the pumpkin up. Make sure you get it before the pumpkin vanishes into thin air.
Second, when you have had a pumpkin, craft a shear with two iron ingots.
Place the pumpkin on the ground and close to you. Use the Hotbar to equip the shear and use it on your pumpkin by left-clicking on it. When you see marks on the pumpkin as indicated in the picture, it means you have successfully carved a pumpkin.
All you need to do now is digging it up, store it in the inventory, and move on to Jack O lantern in Minecraft recipe.
How to make a Jack O Lantern in Minecraft
1. In a Nutshell
To craft a Jack O'lantern in Minecraft, put a carved pumpkin in the crafting GUI with a torch stick on the beneath. Players should place the pumpkin in the 3x3 grid's center.
Once the player has completed making a Jack O Lantern, simply move it to the inventory.
2. Step-by-Step Guide
Follow this simple guide and you will get a Minecraft JAck-O-Lantern without an obstacle:
Start making a Jack o'lantern by open your crafting table along with the contained ingredients in the inventory.
Put the carved pumpkin block you have made from the inventory to the first row's second cell.
Next, put the torch right underneath the craved pumpkin. It coincides with the second row's second cell.
Now that players have filled the correct patterns in the crafting area, the jack o'lantern shall show up in the box to the right. You need to move the new item to your inventory, and bam, you now have your own Jack o'lantern!
About Jack O lantern in Minecraft
How can we use Jack-o-lantern in Minecraft? In fact, it can work more than being a decoration.
1. Decoration
Sometimes, players use them in themed ghost house projects to add more spookiness, specifically with Redstone torches and cobwebs.
2. A source of light
When immersed underwater, Jack o'lantern can have light and own a luminance of 15. While they are meant to be decorations, they can also be a striking navigational beacon thanks to the high levels of luminance and exotic appearance.
3. Material to make golems
Apart from that, players can use Jack o’Lanterns to make golems of both iron and snow varieties. You need to stack up the essential number of snow or iron blocks in the requisite configuration, place a Jack o’Lantern atop, and wait for the creation to come alive. When placed, the Jack o’lantern will automatically face you.
Pro tip: Scream “It’s alive... IT’S ALIVE” and the process may be sped up.
FAQs about Minecraft Jack O'lantern
We will also answer the most asked questions about Jack O'lantern in Minecraft.
1. Where do you find Jack O'Lanterns in Minecraft?
You may occasionally find a pre-made Jack o’Lantern in pumpkins piles that generate in snowy taiga and taiga villages. They are most usually found at night as they glow brightly – even underwater, hence melt ice and snow around them.
2. Do Jack O Lantern scare away Enderman?
No, they do not. Their light level merely influences the spawning of mobs, not the direction they would head to.
3. Are Jack o Lantern better than torches?
While both torches and Jack o Lanterns are a decent light source, Jack O'Lantern is better considering the fact that it has a relatively larger light radius and it can function underwater.
>>> Related post: Top 8 Ultimate Minecraft Tips For Exploring Caves