This is a vector: A vector has magnitude (size) and direction: The length of the line shows its magnitude and the arrowhead points in the direction. We can add two vectors by joining them head-to-tail: And it doesn't matter which order we add them, we get the same result:
The two vectors (the velocity caused by the propeller, and the velocity of the wind) result in a slightly slower ground speed heading a little East of North. If you watched the plane from the ground it would seem to be slipping sideways a little. Have you ever seen that happen? Maybe you have seen birds struggling against a strong wind that seem to fly sideways. Vectors help explain that. Velocity, acceleration, force and many other things are vectors. SubtractingWe can also subtract one vector from another:
a − b NotationA vector is often written in bold, like a or b.
CalculationsNow ... how do we do the calculations? The most common way is to first break up vectors into x and y parts, like this: The vector a is broken up into (We see later how to do this.) Adding VectorsWe can then add vectors by adding the x parts and adding the y parts: The vector (8, 13) and the vector (26, 7) add up to the vector (34, 20)
c = a + b c = (8, 13) + (26, 7) = (8+26, 13+7) = (34, 20) When we break up a vector like that, each part is called a component: Subtracting VectorsTo subtract, first reverse the vector we want to subtract, then add.
a = v + −k a = (12, 2) + −(4, 5) = (12, 2) + (−4, −5) = (12−4, 2−5) = (8, −3) Magnitude of a VectorThe magnitude of a vector is shown by two vertical bars on either side of the vector: |a| OR it can be written with double vertical bars (so as not to confuse it with absolute value): ||a|| We use Pythagoras' theorem to calculate it: |a| = √( x2 + y2 )
|b| = √( 62 + 82) = √( 36+64) = √100 = 10 A vector with magnitude 1 is called a Unit Vector. Vector vs ScalarA scalar has magnitude (size) only.
Scalar: just a number (like 7 or −0.32) ... definitely not a vector. A vector has magnitude and direction, and is often written in bold, so we know it is not a scalar:
Example: kb is actually the scalar k times the vector b.When we multiply a vector by a scalar it is called "scaling" a vector, because we change how big or small the vector is.
It still points in the same direction, but is 3 times longer (And now you know why numbers are called "scalars", because they "scale" the vector up or down.) Multiplying a Vector by a Vector (Dot Product and Cross Product)
More Than 2 DimensionsVectors also work perfectly well in 3 or more dimensions: The vector (1, 4, 5)
c = a + b c = (3, 7, 4) + (2, 9, 11) = (3+2, 7+9, 4+11) = (5, 16, 15)
|w| = √( 12 + (−2)2 + 32 ) = √( 1+4+9) = √14 Here is an example with 4 dimensions (but it is hard to draw!):
(3, 3, 3, 3) + −(1, 2, 3, 4) = (3, 3, 3, 3) + (−1,−2,−3,−4) = (3−1, 3−2, 3−3, 3−4) = (2, 1, 0, −1) Magnitude and DirectionWe may know a vector's magnitude and direction, but want its x and y lengths (or vice versa):
You can read how to convert them at Polar and Cartesian Coordinates, but here is a quick summary:
An ExampleSam and Alex are pulling a box.
What is the combined force, and its direction? Let us add the two vectors head to tail: First convert from polar to Cartesian (to 2 decimals): Sam's Vector:
Alex's Vector:
Now we have: Add them: (100, 173.21) + (84.85, −84.85) = (184.85, 88.36) That answer is valid, but let's convert back to polar as the question was in polar:
And we have this (rounded) result: And it looks like this for Sam and Alex: They might get a better result if they were shoulder-to-shoulder! Copyright © 2020 MathsIsFun.com
Vectors are geometrical entities that have magnitude and direction. A vector can be represented by a line with an arrow pointing towards its direction and its length represents the magnitude of the vector. Therefore, vectors are represented by arrows, they have initial points and terminal points. The concept of vectors was evolved over a period of 200 years. Vectors are used to represent physical quantities such as displacement, velocity, acceleration, etc. Further, the use of vectors started in the late 19th century with the advent of the field of electromagnetic induction. Here, we will study the definition of vectors along with properties of vectors, formulas of vectors, operation of vectors along using solved examples for a better understanding. What are Vectors?A vector is a Latin word that means carrier. Vectors carry a point A to point B. The length of the line between the two points A and B is called the magnitude of the vector and the direction of the displacement of point A to point B is called the direction of the vector AB. Vectors are also called Euclidean vectors or Spatial vectors. Vectors have many applications in maths, physics, engineering, and various other fields. Vectors in Euclidean Geometry- DefinitionVectors in math is a geometric entity that has both magnitude and direction. Vectors have an initial point at the point where they start and a terminal point that tells the final position of the point. Various operations can be applied to vectors such as addition, subtraction, and multiplication. We will study the operations on vectors in detail in this article. Vectors - ExamplesVectors play an important role in physics. For example, velocity, displacement, acceleration, force are all vector quantities that have a magnitude as well as a direction. Representation of VectorsVectors are usually represented in bold lowercase such as a or using an arrow over the letter as \(\vec{a}\). Vectors can also be denoted by their initial and terminal points with an arrow above them, for example, vector AB can be denoted as \(\overrightarrow{AB}\). The standard form of representation of a vector is \(\vec{A}=a \hat{i}+b\hat{j}+c\hat{k}\). Here, a,b,c are real numbers and \(\hat{i}, \hat{j}, \hat{k}\) are the unit vectors along the x-axis, y-axis, and z-axis respectively. The initial point of a vector is also called the tail whereas the terminal point is called the head. Vectors describe the movement of an object from one place to another. In the cartesian coordinate system, vectors can be denoted by ordered pairs. Similarly, vectors in 'n' dimensions can be denoted by an 'n' tuple. Vectors are also identified with a tuple of components which are the scalar coefficients for a set of basis vectors. The basis vectors are denoted as: e1 = (1,0,0), e2 = (0,1,0), e3 = (0,0,1) Magnitude of VectorsThe magnitude of a vector can be calculated by taking the square root of the sum of the squares of its components. If (x,y,z) are the components of a vector A, then the magnitude formula of A is given by, |A| = √ (x2+y2+z2) The magnitude of a vector is a scalar value. Angle Between Two VectorsThe angle between two vectors can be calculated using the dot product formula. Let us consider two vectors a and b and the angle between them to be θ. Then, the dot product of two vectors is given by a·b = |a||b| cosθ. We need to determine the value of the angle θ. The angle between two vectors also indicates the directions of the two vectors. θ can be evaluated using the following formula: θ = cos-1[(a·b)/|a||b|] Types of VectorsThe vectors are termed as different types based on their magnitude, direction, and their relationship with other vectors. Let us explore a few types of vectors and their properties: Zero VectorsVectors that have 0 magnitude are called zero vectors, denoted by \(\overrightarrow{0}\) = (0,0,0). The zero vector has zero magnitudes and no direction. It is also called the additive identity of vectors. Unit VectorsVectors that have magnitude equals to 1 are called unit vectors, denoted by \(\hat{a}\). It is also called the multiplicative identity of vectors. The magnitude of a unit vectors is 1. It is generally used to denote the direction of a vector. Position VectorsPosition vectors are used to determine the position and direction of movement of the vectors in a three-dimensional space. The magnitude and direction of position vectors can be changed relative to other bodies. It is also called the location vector. Equal VectorsTwo or more vectors are said to be equal if their corresponding components are equal. Equal vectors have the same magnitude as well as direction. They may have different initial and terminal points but the magnitude and direction must be equal. Negative VectorA vector is said to be the negative of another vector if they have the same magnitudes but opposite directions. If vectors A and B have equal magnitude but opposite directions, then vector A is said to be the negative of vector B or vice versa. Parallel VectorsTwo or more vectors are said to be parallel vectors if they have the same direction but not necessarily the same magnitude. The angles of the direction of parallel vectors differ by zero degrees. The vectors whose angle of direction differs by 180 degrees are called antiparallel vectors, that is, antiparallel vectors have opposite directions. Orthogonal VectorsTwo or more vectors in space are said to be orthogonal if the angle between them is 90 degrees. In other words, the dot product of orthogonal vectors is always 0. a·b = |a|·|b|cos90° = 0. Co-initial VectorsVectors that have the same initial point are called co-initial vectors. Vectors FormulasDifferent mathematical operations can be applied to vectors such as addition, subtraction, and multiplication. In this section, we will explore the vector formulas for vector addition, subtraction, dot-product, cross-product and angle between the vectors. The list of vectors formulas that we will be studying in detail further is as follows:
The following properties of vectors help in better understanding of vectors and are useful in performing numerous arithmetic operations involving vectors.
Operations on VectorsSome basic operations on vectors can be performed geometrically without taking any coordinate system as a reference. These vector operations are given as addition, subtraction, and multiplication by a scalar. Also, there are two different ways to multiply two vectors together, the dot product and the cross product. These are briefly explained as given below,
Addition of VectorsAdding vectors is similar to adding scalars. The individual components of the respective vectors are added to get the final value: a + b = (a1 \( \hat i\) + b1 \( \hat j\) + c1 \( \hat k\)) + (a2 \( \hat i\) + b2 \( \hat j\) + c2 \( \hat k\)) = (a1, b1, c1) + (a2, b2, c2) = (a1 + a2, b1 + b2, c1 + c2) = (a1 + a2) \( \hat i\) + (b1 + b2) \( \hat j\) + (c1 + c2) \( \hat k\) The addition of vectors is commutative and associative. There are two laws of vector addition: Triangle Law of Addition of Vectors: The law states that if two sides of a triangle represent the two vectors (both in magnitude and direction) acting simultaneously on a body in the same order, then the third side of the triangle represents the resultant vector. Parallelogram Law of Addition of Vectors: The law states that if two co-initial vectors acting simultaneously are represented by the two adjacent sides of a parallelogram, then the diagonal of the parallelogram represents the sum of the two vectors, that is, the resultant vector starting from the same initial point. Subtraction of VectorsThe subtraction of vectors is similar to the addition of vectors. But here only the sign of one of the vectors is changed in direction and added to the other vector. a - b = (a1 \( \hat i\) + b1 \( \hat j\) + c1 \( \hat k\)) - (a2 \( \hat i\) + b2 \( \hat j\) + c2 \( \hat k\)) = (a1, b1, c1) - (a2, b2, c2) = (a1 - a2, b1 - b2, c1 - c2) = (a1 - a2) \( \hat i\) + (b1 - b2) \( \hat j\) + (c1 - c2) \( \hat k\) Scalar Multiplication of VectorsA scalar is a real number that has no direction. When a scalar is multiplied by a vector, we multiply the scalar by each component of the vector. The operation of multiplying a vector by a scalar is called scalar multiplication. When a vector a = (a1, a2, a3) = a1 \( \hat i\) + a2 \( \hat j\) + a3 \( \hat k\) is multiplied by a scalar r, the resultant vector is: ra = (ra1, ra2, ra3) = (ra1)e1 + (ra2)e2 + (ra3)e3
The multiplication of vectors with any scalar quantity is defined as 'scaling'. Scaling in vectors only alters the magnitude and does not affect the direction. Some properties of scalar multiplication in vectors are given as,
Scalar Triple Product of VectorsScalar triple product of vectors is the dot of one vector with the cross product of the other two vectors. If any two vectors in a scalar triple product are equal, then the scalar triple product is zero. If the scalar triple product is equal to zero, then the three vectors a, b, and c are said to be coplanar. Also, a·(b × c) = b·(c × a) = c·(a × b) Multiplication of VectorsVectors can be multiplied but their methods of multiplication are slightly different from that of real numbers. There are two different ways to multiply vectors: Dot Product of Vectors: The individual components of the two vectors to be multiplied are multiplied and the result is added to get the dot product of two vectors. The resultant of a dot product of two vectors is a scalar value, that is, it has no direction. Cross Product of vectors: The vector components are represented in a matrix and a determinant of the matrix represents the result of the cross product of the vectors. \(\vec{A} \times \vec{B}\) = |A||B| sinθ \(\hat{n}\) Components of VectorsA vector quantity has two characteristics, magnitude, and direction, such that both the quantities are compared while comparing two vector quantities of the same type. Any vector, in a two-dimensional coordinate system, can be broken into x-component, and y-component. In the figure given below, we can observe these components - x-component, V\(_x\) and y-component, V\(_y\) for a vector,v in coordinate plane. The values of V\(_x\) and V\(_y\) can be given as, V\(_x\) = V·cosθ, and V\(_y\) = V.sinθ |V| = √[V\(_x\)2 + V\(_y\)2] Scalars and VectorsPhysical quantities that do not have any direction are called scalars. Scalars are nothing but real numbers, sometimes accompanied by unit measurements. On the other hand, vectors are physical quantities that have magnitudes as well as directions. Basic operations of addition, subtraction, and multiplication are applicable on both scalars and vectors. Difference Between Scalars and VectorsThe only difference between scalars and vectors is that a scalar is a quantity that does not depend on direction whereas a vector is a physical quantity that has magnitude as well as direction. The common examples of scalars are distance, speed, time, etc. These are real values accompanied by their units of measurements. Common examples of vectors are displacement, velocity, acceleration, force, etc. which indicate the direction of the quantity and its magnitude. Scalars and Vectors Examples: Scalar: Speed as 40 mph, Time as 4 hours which do not indicate any direction Vector: Displacement as -4 ft, velocity -40 mph indicate the direction. Negative velocity and displacement imply that the object is moving in the opposite direction. Applications of VectorsVectors are very useful in the field of Physics and Mathematics. They are used to represent the position, displacement, velocity, and acceleration of objects and physical quantities. Some applications of vectors are,
Related Topics on Vectors: Please check the following links to help us easily learn vectors. Important Notes on Vectors: The following important points are helpful to better understand the concepts of vectors.
go to slidego to slidego to slide
Have questions on basic mathematical concepts? Become a problem-solving champ using logic, not rules. Learn the why behind math with our certified experts Book a Free Trial Class
FAQs on VectorsVectors are geometrical or physical quantities that possess both magnitude and direction in which the object is moving. The magnitude of a vector indicates the length of the vector. It is generally represented by an arrow pointing in the direction of the vector. A vector a is denoted as a1 \( \hat i\) + b1 \( \hat j\) + c1 \( \hat k\), where a1, b1, c1 are its components. What are Examples of Vectors?The physical quantities that are specified completely by the magnitude and direction are called vector quantities. For example, physical quantities like displacement, velocity, position, force, torque, etc are vector quantities. What are Vector Formulas?There are different formulas that can be used to perform operations on vectors. Some of are as given below,
What are the Properties of Vectors?There are several properties of vectors, few of them are:
What are Collinear Vectors?Collinear vectors are vectors that are parallel/antiparallel to the same each other irrespective of their magnitude. The cross-product of collinear vectors is always zero. How are Vectors used in Real Life?In our daily life, you may think of vectors being used to represent the velocity of an aircraft, where both the speed and the direction of movement of the aircraft are to be known. Electromagnetic induction involves an interplay of electric forces and magnetic forces. How are Vectors Linearly Independent?Vectors are said to be linearly independent if there exists a non-trivial linear combination of vectors that is equal to zero. If no such linear combination exists, the vectors are said to be linear dependent. In other words, a set of vectors {v1, v2, v3, ..., vn} are linearly independent if there exists nontrivial scalars k1, k2, k3, ..., know, such that k1v1 + k2v2 + k3v3 + ... + knvn = 0 What is the Difference Between Scalars and Vectors?The scalars are entities with magnitude, that do not depend on direction whereas vectors are objects that have magnitude as well as direction. Scalars are usually real values with units of measurement. Vectors indicate the direction in which the object is moving. For example, time 4 hours is a scalar as it does not give any direction whereas the velocity 40 mph is a vector as it tells that the object is moving in one direction. When are Two Vectors said to be Parallel Vectors?Two or more vectors are parallel if they are moving in the same direction. Also, the cross-product of parallel vectors is always zero. The angle between two parallel vectors is either 0° or 180°, and the cross product of parallel vectors is equal to zero. a.b = |a|.|b|Sin0° = 0. |