Which methods can you use to move text from one part of the document to another select all that apply Group of answer choices?

Answer:

Cut using Ctrl+X,

Explanation:

move your cursor to the new location of text, then paste to the new location with Ctrl+V. Copy using Ctrl+C, move your cursor to the new location of text, then paste to the new location with Ctrl+V.

55e8812d1662829834998139 55e06a8d1496fdb039ceef78

/en/wordxp/use-backspacedelete-and-undorepeat/content/

Introduction

By the end of this lesson, you should be able to:

Cut, copy, and paste
Drag and drop

Often in word processing, you will need to transfer information from one document to another. Instead of having to retype or replace this information, Word allows you to move a block of text, such as a word, sentence, paragraph, page, document, or graphic). Cut, copy, and paste are time-saving features. The Cut, Copy and Paste buttons are located on the Standard toolbar.

Cut and paste

The Cut feature allows you to remove selected text from the document and temporarily place it on the Office Clipboard.
The clipboard is a temporary storage file in your computer's memory. Items placed on the clipboard will remain there until you exit Word.
The Paste feature allows you to get text from the clipboard and place it in the same or even another document.

Copy and paste

The Copy feature allows you to copy selected text from the document and temporarily place it on the clipboard.
The clipboard can hold up to 25 items. Once you copy the 26th item, the first copied item is deleted.
The Paste feature allows you to select any of the collected items on the clipboard and place them in the same or another document.

You can copy information from many different sources, including websites, emails, and other Office applications like Excel and PowerPoint.

Select the text you want to move.
Click the Cut button on the Standard toolbar.
Place the insertion point where you want the text inserted.
Click the Paste button.

Select the text you want to move.
Click the Copy button on the Standard toolbar.
Place the insertion point where you want the text inserted.
Click the Paste button.
Once the item has been pasted, you can determine the formatting by clicking the Paste Options button that appears just below your pasted selection. Check or deselect any of the following options:
- Keep Source Formatting: This maintains the text formatting of the original document.
- Match Destination Formatting: This formats the pasted text to match the text formatting in the document in which it was pasted.
- Keep Text Only: This removes any graphics you may have copied along with the copied text.
- Apply Style or Formatting: This allows you to choose a specific format from the styles and formatting menu.

Click Edit on the menu bar.
Select Office Clipboard.
The clipboard will appear on the right side of the Word window in the task pane.
The clipboard will display any of the 24 items you have copied.

Edit
Cut
Edit
Copy
Edit
Paste

Ctrl+C = Copy
Ctrl+X = Cut
Ctrl+V = Paste

Become comfortable using keyboard shortcuts to increase your speed in word processing.

If you cut, copy, or paste something you didn't mean to, use the Undo button or choose not to save changes to your document when you close it.

The drag-and-drop method of moving text allows you to move selected text using your mouse.

This method is convenient for moving text when:

Moving text from one location to another within a document
Moving text to another document

To drag and drop selected text:
To drag:

Select the text you want to move.
Place the mouse pointer anywhere on the selected text without clicking.
Click and hold the left mouse button until the insertion point changes to a white arrow pointing up to the left.
Left click and drag the selected text to the new location.

To drop:

During this process, the mouse pointer changes to a box with a small white arrow over it to indicate that you are dragging text.
When you reach the new location, release the mouse button to drop the text into place.
Once you release the mouse button, a menu list will appear that offers you the following options:
- Move Here
- Copy Here
- Link Here
- Create Hyperlink Here
- Cancel

Be sure to remove the selection highlight before pressing any key so you don't delete newly moved text. IF you do accidentally delete, press the Undo button.

Challenge!

Open an existing document, or create a new one.
Select some text.
Click the Copy button on the Standard toolbar.
Place the insertion point where you want text to be located.
Click the Paste button.
Select the copied text.
Press the Delete key.

/en/wordxp/use-autocorrect-and-find-and-replace/content/

Click anywhere within the document.
Press Ctrl+A on your keyboard to select all text in the document.

You can also select a specific word, line of text, or one or more paragraphs.

Place your cursor in front of the first letter of the word, sentence, or paragraphs you want to select.
Click and hold while you drag your cursor to select the text you want.

To select a single word, quickly double-click that word.
To select a line of text, place your cursor at the start of the line, and press Shift + down arrow.
To select a paragraph, place your cursor at the start of the paragraph, and press Ctrl + Shift + down arrow.

Select text in the body of a document

Notes: To select an entire document, do one of the following:

On the Home tab, in the Editing group, click Select, and then click Select All.
Move the pointer to the left of any text until it turns into a right-pointing arrow, and then triple-click.

To select	Do this
Any amount of text	Click where you want to begin the selection, hold down the left mouse button, and then drag the pointer over the text that you want to select.
A word	Double-click anywhere in the word.
A line of text	Move the pointer to the left of the line until it changes to a right-pointing arrow, and then click.
A sentence	Hold down CTRL, and then click anywhere in the sentence.
A paragraph	Triple-click anywhere in the paragraph.
Multiple paragraphs	Move the pointer to the left of the first paragraph until it changes to a right-pointing arrow, and then press and hold down the left mouse button while you drag the pointer up or down.
A large block of text	Click at the start of the selection, scroll to the end of the selection, and then hold down SHIFT while you click where you want the selection to end.
An entire document	Move the pointer to the left of any text until it changes to a right-pointing arrow, and then triple-click.
Headers and footers	In Print Layout view, double-click the dimmed header or footer text. Move the pointer to the left of the header or footer until it changes to a right-pointing arrow, and then click.
Footnotes and endnotes	Click the footnote or endnote text, move the pointer to the left of the text until it changes to a right-pointing arrow, and then click.
A vertical block of text	Hold down ALT while you drag the pointer over the text.
A text box or frame	Move the pointer over the border of the frame or text box until the pointer becomes a four-headed arrow, and then click.

Select items in a table

To select	Do this
The contents of a cell	Click in the cell. Under Table Tools, click the Layout tab. In the Table group, click Select, and then click Select Cell.
The contents of a row	Click in the row. Under Table Tools, click the Layout tab. In the Table group, click Select, and then click Select Row.
The contents of a column	Click in the column. Under Table Tools, click the Layout tab. In the Table group, click Select, and then click Select Column.
The contents of multiple cells, rows, or columns	Click in a cell, a row, or a column and then hold the left mouse button down while you drag across all the cells, rows, or columns that contain the content that you want to select. To select the contents of cells, rows, or columns that are not next to each other, click in the first cell, row, or column, press CTRL, and then click the additional cells, rows, or columns that contain the content that you want to select.
The contents of an entire table	Click in the table. Under Table Tools, click the Layout tab. In the Table group, click Select, and then click Select Table.

Select text in different places

You can select text or items in a table that are not next to each other. For example, you can select a paragraph on one page and a sentence on a different page.

Select some text or an item in a table.
Hold down CTRL while you select any additional text or item in a table that you want.

Select text in Outline view

To view your document in Outline view, click the View tab, and then click Outline in the Document Views group.

To select	Move the pointer to
A heading	The left of the heading until it changes to a right-pointing arrow, and then click.
A heading, its subheading, and body text	The left of the heading until it changes to a right-pointing arrow, and then double-click.
A paragraph of body text	The left of the paragraph until it changes to a right-pointing arrow, and then click.
Multiple headings or paragraphs of body text	The left of the text until it changes to a right-pointing arrow, and then drag up or down.

Notes:

In Outline view, clicking once to the left of a paragraph selects the entire paragraph instead of a single line.
If you select a heading that includes collapsed subordinate text, the collapsed text is also selected (even though it is not visible). Any changes that you make to the heading — such as moving, copying, or deleting it — also affect the collapsed text.

Select text in the body of a document

Note: To select an entire document, press CTRL+A.

To select	Do this
One character to the right	Press SHIFT+RIGHT ARROW.
One character to the left	Press SHIFT+LEFT ARROW.
A word from its beginning to its end	Place the insertion point at the beginning of the word, and then press CTRL+SHIFT+RIGHT ARROW.
A word from its end to its beginning	Move the pointer to the end of the word, and then press CTRL+SHIFT+LEFT ARROW.
A line from its beginning to its end	Press HOME, and then press SHIFT+END.
A line from its end to its beginning	Press END, and then press SHIFT+HOME.
One line down	Press END, and then press SHIFT+DOWN ARROW.
One line up	Press HOME, and then press SHIFT+UP ARROW.
A paragraph from its beginning to its end	Move the pointer to the beginning of the paragraph, and then press CTRL+SHIFT+DOWN ARROW.
A paragraph from its end to its beginning	Move the pointer to the end of the paragraph, and then press CTRL+SHIFT+UP ARROW.
A document from its end to its beginning	Move the pointer to the end of the document, and then press CTRL+SHIFT+HOME.
A document from its beginning to its end	Move the pointer to the beginning of the document, and then press CTRL+SHIFT+END.
From the beginning of a window to its end	Move the pointer to the beginning of the window, and then press ALT+CTRL+SHIFT+PAGE DOWN.
The entire document	Press CTRL+A.
A vertical block of text	Press CTRL+SHIFT+F8, and then use the arrow keys. Press ESC to turn off the selection mode.
The nearest character	Press F8 to turn on selection mode, and then press LEFT ARROW or RIGHT ARROW; press ESC to turn off the selection mode.
A word, a sentence, a paragraph, or a document	Press F8 to turn on selection mode, and then press F8 once to select a word, twice to select a sentence, three times to select a paragraph, or four times to select the document. Press ESC to turn off the selection mode.

Select items in a table

To select	Do this
The contents of the cell to the right	Press TAB.
The contents of the cell to the left	Press SHIFT+TAB.
The contents of adjacent cells	Hold down SHIFT while you repeatedly press the appropriate arrow key until you've selected the contents of all the cells that you want.
The contents of a column	Click in the column's top or bottom cell. Hold down SHIFT while you repeatedly press the UP ARROW or DOWN ARROW key until you have selected the contents of the column.
The contents of an entire table	Click in the table, and then press ALT+5 on the numeric keypad (with NUM LOCK off).

Click the File tab, and then click Options.
Click Advanced.
Under Editing options, clear the checkbox next to When selecting, automatically select entire word.

Important: Office 2007 is no longer supported. Upgrade to Microsoft 365 to work anywhere from any device and continue to receive support.

Upgrade now

Select text in the body of a document

Note: To select an entire document, do one of the following:

On the Home tab, in the Editing group, click Select, and then click Select All.
Move the pointer to the left of any text until it turns into a right-pointing arrow, and then triple-click.

To select	Do this
Any amount of text	Click where you want to begin the selection, hold down the left mouse button, and then drag the pointer over the text that you want to select.
A word	Double-click anywhere in the word.
A line of text	Move the pointer to the left of the line until it changes to a right-pointing arrow, and then click.
A sentence	Hold down CTRL, and then click anywhere in the sentence.
A paragraph	Triple-click anywhere in the paragraph.
Multiple paragraphs	Move the pointer to the left of the first paragraph until it changes to a right-pointing arrow, and then press and hold down the left mouse button while you drag the pointer up or down.
A large block of text	Click at the start of the selection, scroll to the end of the selection, and then hold down SHIFT while you click where you want the selection to end.
An entire document	Move the pointer to the left of any text until it changes to a right-pointing arrow, and then triple-click.
Headers and footers	In Print Layout view, double-click the dimmed header or footer text. Move the pointer to the left of the header or footer until it changes to a right-pointing arrow, and then click.
Footnotes and endnotes	Click the footnote or endnote text, move the pointer to the left of the text until it changes to a right-pointing arrow, and then click.
A vertical block of text	Hold down ALT while you drag the pointer over the text.
A text box or frame	Move the pointer over the border of the frame or text box until the pointer becomes a four-headed arrow, and then click.

Select items in a table

To select	Do this
The contents of a cell	Click in the cell. Under Table Tools, click the Layout tab. In the Table group, click Select, and then click Select Cell.
The contents of a row	Click in the row. Under Table Tools, click the Layout tab. In the Table group, click Select, and then click Select Row.
The contents of a column	Click in the column. Under Table Tools, click the Layout tab. In the Table group, click Select, and then click Select Column.
The contents of multiple cells, rows, or columns	Click in a cell, a row, or a column and then hold the left mouse button down while you drag across all of the cells, rows, or columns that contain the content that you want to select. To select the contents of cells, rows, or columns that are not next to each other, click in the first cell, row, or column, press CTRL, and then click the additional cells, rows, or columns that contain the content that you want to select.
The contents of an entire table	Click in the table. Under Table Tools, click the Layout tab. In the Table group, click Select, and then click Select Table.

Select text in different places

You can select text or items in a table that are not next to each other. For example, you can select a paragraph on one page and a sentence on a different page.

Select some text or an item in a table.
Hold down CTRL while you select any additional text or item in a table that you want.

Select text in Outline view

To view your document in Outline view, click the View tab, and then click Outline in the Document Views group.

To select	Move the pointer to
A heading	The left of the heading until it changes to a right-pointing arrow, and then click.
A heading, its subheading, and body text	The left of the heading until it changes to a right-pointing arrow, and then double-click.
A paragraph of body text	The left of the paragraph until it changes to a right-pointing arrow, and then click.
Multiple headings or paragraphs of body text	The left of the text until it changes to a right-pointing arrow, and then drag up or down.

Notes:

In Outline view, clicking once to the left of a paragraph selects the entire paragraph instead of a single line.
If you select a heading that includes collapsed subordinate text, the collapsed text is also selected (even though it's not visible). Any changes that you make to the heading — such as moving, copying, or deleting it — also affect the collapsed text.

Select text in the body of a document

Note: To select an entire document, press CTRL+A.

To select	Do this
One character to the right	Press SHIFT+RIGHT ARROW.
One character to the left	Press SHIFT+LEFT ARROW.
A word from its beginning to its end	Place the insertion point at the beginning of the word, and then press CTRL+SHIFT+RIGHT ARROW.
A word from its end to its beginning	Move the pointer to the end of the word, and then press CTRL+SHIFT+LEFT ARROW.
A line from its beginning to its end	Press HOME, and then press SHIFT+END.
A line from its end to its beginning	Press END, and then press SHIFT+HOME.
One line down	Press END, and then press SHIFT+DOWN ARROW.
One line up	Press HOME, and then press SHIFT+UP ARROW.
A paragraph from its beginning to its end	Move the pointer to the beginning of the paragraph, and then press CTRL+SHIFT+DOWN ARROW.
A paragraph from its end to its beginning	Move the pointer to the end of the paragraph, and then press CTRL+SHIFT+UP ARROW.
A document from its end to its beginning	Move the pointer to the end of the document, and then press CTRL+SHIFT+HOME.
A document from its beginning to its end	Move the pointer to the beginning of the document, and then press CTRL+SHIFT+END.
From the beginning of a window to its end	Move the pointer to the beginning of the window, and then press ALT+CTRL+SHIFT+PAGE DOWN.
The entire document	Press CTRL+A.
A vertical block of text	Press CTRL+SHIFT+F8, and then use the arrow keys. Press ESC to turn off the selection mode.
The nearest character	Press F8 to turn on selection mode, and then press LEFT ARROW or RIGHT ARROW; press ESC to turn off the selection mode.
A word, a sentence, a paragraph, or a document	Press F8 to turn on selection mode, and then press F8 once to select a word, twice to select a sentence, three times to select a paragraph, or four times to select the document. Press ESC to turn off the selection mode.

Select items in a table

To select	Do this
The contents of the cell to the right	Press TAB.
The contents of the cell to the left	Press SHIFT+TAB.
The contents of adjacent cells	Hold down SHIFT while you press the appropriate arrow key repeatedly until you have selected the contents of all of the cells that you want.
The contents of a column	Click in the column's top or bottom cell. Hold down SHIFT while you press the UP ARROW or DOWN ARROW key repeatedly until you have selected the contents of the column.
The contents of an entire table	Click in the table, and then press ALT+5 on the numeric keypad (with NUM LOCK off).

Click the Microsoft Office Button
, and then click Word Options.
Click Advanced.
Under Editing options, clear the check box next to When selecting, automatically select entire word.